Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,the option 'Resync fails on FNF' does not seem to work for SPA1x2 in FW 1.2.1 (004).The SPA logs 'Resync failed: file not found' and associates the 'Resync Error Retry Delay' timer, regardless of the option set to No.I tried various combination...
Hello,what does the <SP_Default> option do in detail?My guess is that it is means 'Service Provider default provisioning path' and that it is a value that is not erased after a factory reset. So the device will try to provision itself via this defaul...
Hello,does anyone know a way to easily upgrade on a brandnew SPA122 with shipped FW 1.0.1?The environment has NO options capable DHCP server (only 'simple' DHCP), NOR a TFTP server and NO WAY of accessing the 192.168.15.0/24 network!Available is a PC...
Hi,obviously the switching between bridge and NAT mode, using the IVR code 201# still isn't working in the latest firmware.201 lets you chose between NAT (0) and bridge (1) for the yellow ethernet port - at least on the SPA-2102 and SPA-3102.The SPA1...
Hello,in the new FW 1.2.1 it is possible to enable or disable the reset button.Is it also possible to restrict the button to reset 'user values' only and to leave the 'admin values' intact? Or to distinguish between a network factory reset and a voic...
@terryip83: by now I advice to disable the reset button completely. The device behaves like the well functioning old legacy devices, that had no reset button. You can save yourself a lot of trouble with your customers and setups But why shall one al...
@terryip83: I know, but it has nothing to do with the reset button!I suggest to extend the values for the Reset_Button_Enable as follow:0: disable completely1: enable completely2: enable restart only4: reset only network settings8: reset only voice s...
Curious! Are you using TFTP or HTTP? I'm using the latter.The way you examined it is the same I did. I took notice of it when the periodic resync (in lab set to 60 seconds) didn't occur and the error timer came into effect. The log definetely states ...
Hi,I don't think so. The device was already factory reset and the parameters are as recommended (e.g., no time set).Setting the 'Resync fails on FNF' has absolutely no effect, it always fails if file not found, even if it should not fail.So, case rem...
