Good Afternoon Jonah, In order to have a voice vlan over the 1300 wireless bridge you need to configure vlans on both bridges and advertise the vlan on the ssid. You will have to remove the ssid that you have created under the ssid manager. You can then go in and create the vlan 1 and vlan 100 on your root bridge. Once you have that you will create an ssid called networkv1 and select vlan 1. Also check the box to bind it to your 802.11 radio. Do the exact same thing and create another ssid for the vlan 100. Once you have done this on both sides of the bridge it will send that vlan ID across your wireless link. Also, are you doing layer 2 over the bridge with a single vtp domain etc? If you are, you will want to make sure you go on the swtich that is connected to the root bridge and on the trucked port make sure you are pruning vlans. You want to make sure you only are allowing vlan 1 and 100 to pass to the trucked port. I hope this helps.
... View more