About jbrown129

jbrown129 · 09-13-2022

Hey people, wondering if you can help a homelabber..So my ISP gives me a /56 and I want to split this up on my LAN side of my second router (rt1). I currently have two routers:Cisco C1117-4P (cisco.rt2 connects via VDSL WAN to ISP)OPNsense (opnsense....

jbrown129 · 09-11-2022

Can the WAN interface be bridged with a LAN port? I've already got a router on my network and I want to use the C1117 just for it's VDSL interface. With the old Cisco 877 I used a bridge group on the ATM0 interface and BVI but it seems that's not sup...

jbrown129 · 09-07-2022

I'm upgrading from my crappy old TP-Link, which didn't support SOS or ROC. Anyway I got my hands on a second hand Cisco C1117-4P for a good price so I've decided to use that. They were often sold to Telstra Business customers in Australia and I'm get...

jbrown129 · 09-23-2022

ip nat inside source route-map PRIMARY interface GigabitEthernet8 overloadI'm not sure this is correct. GigabitEthernet8 is an internal interface, I think that should be Ethernet0. Does "show controller vdsl 0" show that the link is trained?

jbrown129 · 09-18-2022

FTTN in Australia customer has to supply hardware. All other connection types, FTTC, FTTP etc have a NTD. FTTC you should use the NBNCo NTD provided as it powers the DPU.If you're on plain FTTN ie and the only thing in your house is a TO (Telecommuni...

jbrown129 · 09-18-2022

YES! it works. I feel stupid for not noticing that honestly, I should have. I knew it was close to working!This is the complete config:!! Last configuration change at 15:55:39 UTC Sun Sep 18 2022 by admin!version 17.6service timestamps debug datetime...

jbrown129 · 09-18-2022

Hmm. okay, well I removed it. Still can't seem to get a lease on igb3 (opnsense) to Gi0/0/0. Not sure what else to try, it does seem @jellybeanshiba and @scidoner got it working in that other thread. I wonder what I missed.

jbrown129 · 09-18-2022

I think I copied that from the example in this thread, which appears to be what I am attempting to do.I assumed that line removed the vlan 100 tag before putting traffic into the WAN link, my understanding from this post is it is a way to "strip the ...

Member Since	‎09-07-2022 01:37 AM
Date Last Visited	‎09-28-2022 12:01 AM
Posts	19
Total Helpful Votes Received	15

User Statistics

User Activity

Prefix delegation on LAN side of second router

Full bridge mode WAN with GigabitEthernet interface?

VDSL ATM Bridging mode to router

Re: Cisco 897VAG-LTE series router, can it be setup on FTTP NBN?

Re: Cisco 897VAG-LTE series router, can it be setup on FTTP NBN?

Re: Full bridge mode WAN with GigabitEthernet interface?

Re: Full bridge mode WAN with GigabitEthernet interface?

Re: Full bridge mode WAN with GigabitEthernet interface?