Hello. I am running IOS 12.4(1) on a new 837 router. VPN clients can connect and access internal network. However I cannot seem to get split-tunnel working.837 has single static public IP. I am static NATing some ports to internal servers. I hav...
I removed the reverse-route with no change in status. IOS v12.4.2T was issued with some caveat discussion about split-tunnel corrections. I tried v12.4.2T too with no change. I then tried several of the v12.3 releases with no change.The route prin...
Hi Rooter --The Windows "route print" on the PC running VPN Client, shows the remote network gateway AND the VPN IP Pool IP as the gateway for all the segments. When the tunnel is disconnected, I only have the remote network gateway which I would ex...
Rooter, it didn't work. I applied the ACL as you described with my IP segment info, and more importantly, my VPN IP Pool.The status is the same where the VPN tunnel works, but I cannot get Split Tunnel to work.
Thanks Rooter. I'm out of town until Friday (24 June), but will try your suggestion Saturday & let you know here.I've seen examples of split-tunnel ACLs permitting local LAN to only to the IP pool and others to any.