Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,If all the real servers in the serverfarm fail the health probe, how is CSM going to response. 1) Will the vserver status be as "not in service" and will the VIP still be pingable?2) Will the CSM response immediately to the client with a TCP r...
Can anyone enlighten me on this question.When using Power injector to power up the AP, what will happen to the person if he were to cut the ethernet cable when there is power being transmit over the cable?
Hi Joao,In your approach, try to implement on direct server return(DSR) where you do not need to configure nat client.In DSR, you are required to use PBR to divert the traffic to the CSM.
Hi Gilles,Yes, i read that document before and its good. It work fine for my transparent caching, just that i configure it in a direct server response mode. Recently while trying to configure load balancing for proxy server, i am hit with problem due...
Hi Gilles,I am trying to configure the CSM to load balance some netcache servers with the CSM configured are the proxy IP. PBR is used to divert all web traffic to the CSM.I configure the proxy IP as a virtual server and the netcache as real in the ...
Hi PengKe11, in normal circumstances, no one will go and cut the ethernet cable, it do sound stupid to do that too. But cabling contractor when doing retrival of un-use point or decommissioning of cables may accidentally cut the Power over Ethernet...
