Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear all , About Net : There are more than 70, 2960 switches(access level) , and more than 30, 3750 (Dist level) ,and One 6509 as a core ,Each 3750 ,is in one Vlan , and several 2960s are connected to a 3750 using trunk port ,(ip routing is enabled...
Dear Clarke , At first ,Thank you very much for your time, It seems te be BUG of ciscoworks; I defined SNMP community with $ and @(example SNMP-SERVER COMMUNITY @t$nmp RO ) In this case , UT can't fetch users on 2960s VLANs!! When I created new commu...
On that switch ,I was set ,$snmp as community,I'll set new community without $ on a 2960 and restart UT and will send you the result ,I hope the problem is solved , Regards , Mike
Hi again , Please find bellow the output of "show snmp" command on 2960 switch,I use "snmpwalk" using $nmp@32 ----------------------------------ack-c#sh snmpChassis: 9225 SNMP packets input 0 Bad SNMP version errors 772 Unknown community name ...
Hello Clarke ,I check DCR , It is ok , Using SNMPWALK , just 3750 switches answer it, for example in Rack-C ,all ports are in Vlan40 ,management ip for 3750 is 192.168.186.49 ,and for one 2960 is 192.168.186.50.Now using snmpwalk ,for $nmp@40 on 375...
