About UlrikFriisConsult

UlrikFriisConsult · 04-26-2015

When upgrading to 1000 Mbit/s internet connection I bought the RV320.My setup:RV320 - Firmware 1.1.1.9Working mode: GatewayFixed IP from ISP via DHCPDMZ enabled 10.7.7.1 (10.7.7.0/24)When I enabled the DMZ, the RV320 wrote new access rules on the fly...

UlrikFriisConsult · 06-18-2015

When you change the setting for the WAN 2 port to be DMZ port you need an extra public IP number. It took me hours to figure that out. Cisco could have mentioned this in the manual, but they didn't.I have configured my RV320 with a VLAN, where I have...

UlrikFriisConsult · 06-17-2015

Well - it all boils down to a crappy manual. Administration and configuration of the RV320 is miles apart from ie. ASA 5505, and if Cisco had bothered to write a decent manual and explained how the DMZ works on the RV320, then I wouldn't have spend h...

Member Since	‎04-26-2015 08:58 AM
Date Last Visited	‎09-08-2022 04:49 AM
Posts	3

User Statistics

User Activity

Can't access the internet from RV320's DMZ

When you change the setting

Well - it all boils down to a