I HAVE 2702 CAPS, A LAPTOP AND A WLC 5508 CONNECTED TO A 3560 G SWITCH. AP'S POWERED FORM THE SWITCH. FOR DISCUSSION PURPOSES THE WLC AND SWITCH IS POWERED FORM A UPS NOT PLUGGED INTO AN OUTLET. EVERYTHING WORKS FINE ON MY LIVING ROOM TABLE AP...
sorry about the limited info. its all i have being not on the site to get the ap boot log. the dhcp is from the wlc and works fine while sitting on the dining room table and not connected to the home router it gives me a join status onthe stat...
i will try to get that done. it is note worthy to say it is fully working in the home location. i am at home,,, the ap is joined to the wlc,, i am connected to the ap as a desktop cell and pad client. ( blue light on ap"). i am unable to get...
all your suggestions should be moot because the entire package works in the home. teh software is i think 8.4 on the wlc and the ap's. they work fine to gether at home. i am doing the side by side comparison,,,, as not a thing in the hardware cha...
there is NO difference in the hardware. i am moving the entire hardware group from location to location. everything is the same right down to the patch cables. i am using a switch,, 2702 ap's and a lap top with the 5508 wlc. all those items are ...
FOR SOME CLARIFICATION . I AM LOOKING AT THE GENERAL PROCESS OF1. AP GETS IP ADDRESS 2. AP JOINS WLC 3. CLIENT LOGS ON AT HOME ALL THREE STEPS HAPPEN AND CAN BE SEEN INTHE STATIXZTICS AND THE AP INFO. WHEN ON THE SHIP STEP 2 DOE...
