About rob_turnbull1

rob_turnbull1 · 05-01-2015

I am having trouble with my Nextiva VOIP service where occasional incoming calls will go directly to voicemail. I have a RV320 connected to dual WANs (Comcast and Century Link) and have load balancing enabled. The RV320 is the only DHCP server on the...

rob_turnbull1 · 09-08-2015

I know I'm replying to an old thread but I have experienced the same result when I configure bandwidth management on the RV320. I called Cisco support and found out that this is a limitation of the RV320: "High Priority domain shares about 60% of th...

rob_turnbull1 · 08-20-2015

When you plug in the WAN cable connector into WAN port 1, do the status lights come on? If the status lights don't come on check the WAN 1 status in the Port Status menu.

rob_turnbull1 · 08-20-2015

I had a similar problem when I upgraded the RV320 firmware to V1.2.1.13 causing the router to "hang" about once an hour. I contacted Cisco Support and the support engineer recommend that I reset the router to its default configuration and manually r...

rob_turnbull1 · 08-18-2015

We use Shrew Soft standard version 2.2.2 mainly for remote desktop connections to our admin servers. It seems to be stable but I initially had problems connecting from a client lan that had the same subnet configuration as the office lan. Once I cha...

rob_turnbull1 · 08-15-2015

Our church uses an RV320 as a gateway and DHCP server. We bought the RV320 new and there was no disk for the Easy VPN software. I contacted Cisco Support and was told that the software is no longer shipped with the RV3xx routers and not supported. ...

Member Since	‎05-01-2015 10:05 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	6

User Statistics

User Activity

How to configure RV320 to support Nextiva VOIP?

I know I'm replying to an old

When you plug in the WAN

I had a similar problem when

We use Shrew Soft standard

Our church uses an RV320 as a