Dear All,
I am using URL filter by regex on my ASA 5525 version 9.2(2)4 but it's not working. The domains are not blocked. Please find in attachment the config I used
Dear Support, I have some issues with my VPN site to site. The tunnel is up but no traffic. I receive this error message from the logs: Please your help is needed. Thank in advance.4Jul 07 201523:30:23106023X.X.X.X Y.Y.Y.Y Deny protocol 0 src outsid...
Dear Support, I want to setup the VLAN architecture below:10 VOIP active Gi0/1, Gi0/2, Gi0/3, Gi0/4 Gi0/5, Gi0/6, Gi0/7, Gi0/8VLAN 10 is already configured. Now I want to...
Dear Support,I have some slowness in my network for outbound Internet. When I cheched the interface connected to outside, I see many packets dropped. what I can do to solve it . Below the interface detail.Thank in advance for your support! 921...
Hi Michael,
Thank for your feedback. I try with another domain http but still the same. Below the config. The traffic is from inside to outside.
regex speedtest "\.speedtest\.net"class-map type regex match-any DomainBlockList match regex speedtes...
Hi togrul.azizli,I have modified the ACL:access-list outside_acl permit ip any host 192.168.0.100access-list outside_acl permit ip any host "your public ip"but I received many logs llike below:Deny udp src outside:75.154.164.197/23676 dst inside:192....
Hi togrul.azizli,I have replaced the ACL by:access-list outside_acl permit ip any anyNow, I have no error message from logs.I have created VPN site to site:For example : my subnetwork is 192.168.0.0/24 NAT-ted with public IP X.X.X.X to peer side 192....