Hi,Pls remove the route for 10.19.48.0 that you have applied. Its is only complicating the issue. This is probably a hop somewhere on the HQ side.Pls paste the outputs as I have requested. One more thing is to create two loopbacks interfaces, one on ...

Hi,I strongly believe this is routing issue , probably on the HQ. Hence a reverse route issue. I also see Rip running.So pls do a sh ip route on the HQ router fr the branch segment.If it points correctly then, pls try pinging the branch interface. Al...

Hi,Thanks Kerek. That helped.I bilieve kerek is right you need to check if IPSEC is up at all. I do not see any match statements " vpn-dynamic " in the configurations part below.crypto dynamic-map vpn-dynamic 10 set transform-set tr-transport-aes-sha...

Hi Drummond,Can you pls reattch the config. This time just copy the sh run from cli directly to fresh notepad. pls do use tftp, it not opening up properly.I would also request you to attach a sh ip route for the 10.118.x.x segment and also a sh cry i...

Hi,From the config sent out with respect to Bransch office, it appears that the trace is taking a fisrt hop :10.19.48.1. Can u pls do a sh ip route and find out which interface is next hop for this IP.This subnet is not available in the router config...