Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
10.80.128.0---------ASA5200:192.168.1.2---------------------PAT firewall 7800-----------100.100.100.100:ASA5200----10.80.192.0 Hi,pls check this diagram and configuration,is there something wrong1:I need 10.80.128.0---10.80.192.0 connect via ipsec2:1...
Hi,Does ASA 5500 has stateless filter to drop packet even when 3-way handshake is finishedFor example,1: 3-way handshake is done2:client send data to server3:I apply a statless filter to the incoming interface to drop the packet from the clientThanks
Hi,everyonemet a weird issuewhen I log in ASA via asdm launcher ,it stuck and no error shows ,few mins later,the asdm launcher exit auotmaticallyI also try https://x.x.x.x to visit ASA,it is the same ,no respond ,only can find broswer stuck thereso I...
can u give me an example of configuration refred to my caseit is a simple oneI thinkyes,I copy this from a IOS ,so it looks like a router configuration
the current version is as below,should I upgrade it?sjvpvpnASA(config)# show version Cisco Adaptive Security Appliance Software Version 8.0(4) Device Manager Version 6.1(5)Compiled on Thu 07-Aug-08 20:53 by buildersSystem image file is "disk0:/asa...
1:how NAT-T affect the two phase (main mode and quick mode) in negotiation ?2:how the NAT-T(udp 4500) affect the data plane when there is trafficit is better if someone can can me a diagram of the traffic to explain thisI appreciate this very much3:t...
Hi,Mirober2The case I want to achieve is like thisIn general,firewall works in stateful status,it means it will check the session and ACL to permit or drop a packet,for exampleclient1 ------|untrust-------trust|-------client2If client want to visit c...
