Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,Need help configuring the ASA 5510 for port forwarding. I would like to configure the ASA5510 to open port 12345 and forward the traffic to a machinebehind the ASA, which has a IP address of 192.168.1.2.Thank you!David
I set up an ASA 5505 at home through PPPOE connection. The ASA seems to obtain an IP address correctly.and I can ping a public ip address using the outside nic, but not the inside nic. I saw the error messagewhen I ping: No route to ff0213 from fe8...
There must be an ACL configuration issue. How do I configure the ASA 5505 so that the computersbehind it can ping an internet IP address such 4.2.2.2 or www.google.com.Thank you,David
I have replaced the cables and the Cisco ASA 5505, I still lose packets whenI ping a pc on the other end of the site to site IPsec vpn tunnel. Can someonetell me if this is related to the configuration of Cisco ASAs or other networkingproblems. Th...
For the ASA 5510, the inside nic IP address is 192.168.1.1 and the outside nic is connected to a public ip address.Through a router that is connected to 192.168.1.0 network, we created a subnet of 192.168.2.0 network andthat all computers behind the ...
I would like to thank all of you giving me good suggestions on this problem.It was Windows Vista problem. Windows Network Diagnostics tool automaticallyrepaired Internet connection problem by resetting DNS commmunication. Sincerely,David Wu
I can add the following command lines, but makes no differencesdhcpd address 10.40.1.11-10.40.1.33 insidedhcpd dns 64.83.1.10 64.83.0.10dhcpd enable insideThanks for your input!!
