Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Under ASA 7.0.2.5, even when the debug commands are enabled there is no output, is this a bug or is there anything else that needs to be enabled to get the debug outputs.CoreFW(config)# debug crypto isakmp 255 CoreFW(config)# debug crypto ipsec 25...
We need to establish Tunnel between ASA 5520 and Sonicwall Firewall. The network is LAN-- ASA-- Core L2--- bGP Router--- ADSL Router --Sonicwall FW -- LANThe tunnel is not getting established. I am attaching the Tech Report, Debug outputs. The presha...
Hi Guys,We managed to solve the problem, NAT-R was enabled on the farend sonicwall and once we disabled the tunnels came up fine.The other problem we were facing was creating multiple VPNs to a single peer which was not happening with 7.0(1). Opened ...
Hi Shijo,Tried using Peer IP without any change in status.ZapAppCore-Fw1# sh crypto ipsec statsIPsec Global Statistics-----------------------Active tunnels: 0Previous tunnels: 0Inbound Bytes: 0 Decompressed bytes: 0 Packets: 0 Dropped pac...
