Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I have a little question on IPSec on ASA5510.I want to have a L2L tunnel IPSec on both outside and DMZ interfaces with only two networks.The VPN on the DMZ interface will be the backup of the outside.You can see the network diagram in attachme...
Hi all,I have some trouble and I have no idea now ...I have the following network :------------------------|-------------| <-Inside-> Cisco 1800 <--> Private VPN <--> FTP ServerFTP Client <-DMZ-> | ASA 5510 |------------------------|-------------| <-...
Hi, thanks for your reply.In fact, I want to have both interface : Outside & DMZ.The outside interface will only use to nat the inside to Internet and the DMZ will have the VPN.If my ISP on DMZ failed, I want to have the VPN on my outside interface.S...
I think it can not work just with ACL, what is your config ?Perhaps this link can help you :http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806745b8.shtml
I think you must use the rommon.On Pix you have a file named pixXX.bin for the recover mode.See the link :http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_password_recovery09186a008009478b.shtml
Yes, my configuration contains this items.If I don't have the ASA, I have the following sequences (wireshark) :ftp-data > 6049 [ACK] Seq=1 Ack=9577 Win=25992 Len=0 TSV=1675536326 TSER=23653399FTP Data: 1368 bytesFTP Data: 1368 bytesftp-data > 6049 [A...
