Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hey All,I am looking for some advice on how to configure a redundancy Protocol on Packet tracer for my network and any help is greatly appreciated!I have been tasked with creating a redundant network which operates between 2 buildings. I have chosen ...
Hey Joseph,Thank you that makes more sense now,When I mentioned about having two members active for the network to function, I meant in general terms rather than HSRP, as there are 2 devices which need to be active at the same time to allow the build...
Hmmm interesting,When you say the active is per VLAN, are you referring to an active switch on a per VLAN basis? so a device that is active for VLAN 10 may be standby for VLAN 20 for example?Also HSRP members, are they the devices themselves or the V...
Hey,Are the virtual gateways different to the SVI IP addresses? At the moment the top left L3 switch is my root bridge and is also the switch which the end devices in B1 are using as its default-gateway with the SVI addresses. This is mirrored in B2 ...
At current I've got 10 SVIs on each switch, as I have 10 VLANs overall. On each switch, the SVI for that particular VLAN has a different IP address from the VLAN address block i.e one switch has 172.16.0.44, another has 172.16.0.45, another has 172.1...
