Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello everyone,I made a Wireguard VPN server in Proxmox with no internal firewall. Our firewall is Cisco Firepower 1120 which manages all the aspects.I have tested connecting to VPN server from within LAN and it worked but no internet access, I added...
Hello everyone, I became a System Administrator for a company that manages IT things including Firepower. ATT and I worked together last week to replace their modem.After replacing modem, the port on Firepower that is connected to modem (GE1/1) kept ...
I tried to enable it but I received this error:You cannot select the Perform Route Lookup option if you select interface for translated sourceThe Perform Route Lookup option is available for identity NAT only. The original and translated source netwo...
Yes, the VPN-Server is set to 192.168.1.158 which is a local IP. I have tried to look into capture but found this instead:translate_hits = 4567, untranslate_hits = 431710 (inside) to (outside) source static VPN-Server interface service _|NatOrigSvc_7...
