Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We want to upload the configuration backup .json file(s) of the APIC cluster with scp to a remote location using a public key.I have tried to enter the public key in OpenSSH format, but I get an error.What format does the public key need to be ?The d...
I am trying to accomplish scp or sftp backup using a user with a keypair. on a NX9K switch with NX-OS version 9.3.12.I am using this procedure: https://www.cisco.com/c/en/us/support/docs/switches/nexus-9000-series-switches/215025-configure-ssh-passwo...
We are trying to setup a BFD neighourship between a N9K and a Google Cloudrouter. The Cloudrouter supports bfd with only 1000 ms TX and RX intervals. The NXOS version is 9.3.8.The bfd potocol is enabled on the interface to the Cloudrouter:interface E...
We are using NX9K peered pairs as IPN switches to interconnect 3 ACI pods. Initially 2 10G connections were used to interconnect pod1 and pod 2 (pod 3 is not relevant for this issue we are facing). So IPN switch 1-pod1 is connected to IPN switch 1-po...
I have it working though... but the MAC address of the Cisco Phone needs to be authenticated first. I have done this through a static MAC address list. Once it authenticates and I then remove the MAC address from the Group, the Cisco Phone is profile...
I have the same issue too.. My switches are Meraki MS. I have one Cisco phone 7821 authenticating and profiled correctly during the test and before roll-out on all the switches. The Cisco 7812 phones are just being profiled as "Cisco Device" and not ...
