About Matsu1092

Matsu1092 · 03-22-2024

Hi,We want to create DMVPN tunnel by using C8200-1N-4T.We have activated network and dna licenses, but when we try crypto commands, there is no choice for Diffie-Hellman group 2.C8200 is currently showing below DH-groupRouter(config-isakmp)#group ? ...

Matsu1092 · 01-19-2023

Hello,I use Cisco 1921, IOS 15.2(4)M4.below is QoS configuration on this router.!policy-map QoS class Voice set precedence 5 priority percent 10class MCU set precedence 1 bandwidth percent 50class Management set precedence 2bandwidth perce...

Matsu1092 · 03-22-2024

Hi MHM,Thanks for the info.So when accepting new dh group on the hub, will adding another isakmp policy works?Or do we need to add dh group on the exisiting isakmp policy?<example>■Current config crypto isakmp policy 1 encr aes authentication pre-sh...

Matsu1092 · 01-22-2023

I understood,"bandwidth percent 1" means "minimum guaranteed bandwidth is 1% (actually 9%), not upper limit.paul driver ,Joseph W. DohertyThank you very much for your help.

Member Since	‎01-19-2023 08:25 PM
Date Last Visited	‎11-08-2024 06:12 AM
Posts	4
Total Helpful Votes Received	3

User Statistics

User Activity

Missing DH group 2 / ipsec(DMVPN) command on C8200-1N-4T

Regarding to the config of QoS on policy-map

Re: Missing DH group 2 / ipsec(DMVPN) command on C8200-1N-4T

Re: Regarding to the config of QoS on policy-map