Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, we have a wireless setup with a HA-Pair of 5760 serving 8 WLANs via 3702APs. One of the WLANs is using WPA2-PSK with MAC-filtering. Now I'm facing the problem that some sort of clients are not reachable via the 5760. Looking at the controller the...
Hi there,I setup a guest WLAN in our LAB environment. I have one internal WLC connection to an anchor controller in our DMZ. I'm using the WLC integrated web-auth portal which works fine. To gain more flexibility regarding guest account provisioning ...
Our WCS shows the following events for some APs:AP x with protocol '802.11a' on Controller y is contained as a Rogue preventing serviceThe problem I have with this message is that the affected APs are 1231 and do not have a 802.11a radio interface a...
our arp cache is 4 hours - but I face the problem immediately in the moment the clients roam from the old WLC/AP to the new WLC/AP After I ping the client from the new WLC it is also reachable from the LAN that's why I think it is not an ARP issue
today I activated the feature "passive client" for the affected WLAN - this seems to improve the situtation - at least I can now reach the clients after pinging the clients directly from the controller - I don't understand why I have to ping the clie...
