Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
We have new cluster of 9800-80 controllers. We are migrating old APs from 8540 using wlan poller. However, when it comes to changing primary base and reload, we can see that primary base is set on APs and they reloaded, but only a few from a g...
We have created flex profile and local switched wlan (there are several APs in the facility, all of them are tagged with one and only flexconnect wlan/ssid, they all go through locally switched vlan 100 (no other SSIDs on AP, meaning no other central...
Hi,
Is there a way to define burst data rate on WLC 9800? We are migrating AP from WLC 8540 to WLC 9800 and on WLC 8540 override per-ssid bandwith contract is configured like in the attached img.
How can we recreate that on WLC 9800? We can set qos ...
Hi,Thanks for your reply.
It is WLC 9800-80.
From the WLC point of view we can see Client MAC address as: 6c1c.7137.7a74. We have 3 problematic clients and the mac part is the same except the last digit, a74, a77, a70 for example.
Cisco IOS XE Software, Version 17.09.03
For this specific occasion we migrated 10 x AIR-AP1832I-E-K9.This is forwarded to all 10 APs using the poller:capwap ap primary-base WLC9800-TKC x.x.x.x%confirm% reload
Yes, the APs that are not moved to new WL...
