We have a connection between a PBX and a Call Manager using an 3660 as a H.323 Gateway, using an PRI-ISDN E1 ECMA-QSIG. Only works properly the service "A Presentation Number" in both direction.This is we can see only the "A number" in both direction...
In my experience FAX passthrough over G.711 works ok. Check the clock in the E1/T1 interface. You should avoid slips in the E1/T1 clock, if that happens you will have that type of issues.I have tested it with H323.
Hi.It happened to me too, in the version 1.1.17. If you configure in the "platform" access, the host name of the self server (CMM) with its IP address, in the host menu, it is solved.BR.Francisco
Hi everybody.On the other hand, Here I am configuring the CMM, and I´m not able to startup the remote call, in fact the it seems a wrong configuration, but the CTI´s ´ports are registered in the CCM. I don´t understand why the cti route point must h...
HiIt seems a problem in the TDM link between the gateway and the PSTN, It could be that is missing the "B-answer" from the PSTN side, and the CCM sends a "Clear Forward". Then, you can verify the controller gateway configuration.I hope this help you...
