Can anyone help me understand why the active window I'm working in will automatically deselect so I can no longer work in it unless i reclick in that window/application? This only happens when I have packet tracer open.Trying to do some lab work as I...
Forum Posts
I am running a ISR 4431 IOS 16.2.. I am trying to monitor the B channels of our PRI's using SNMP. I see there is a MIB "IF-MIB" When I run a program that pulls the MIB status I do not see any b channels. There use to be a MIB on the 3600/3700 but I d...
I just factory reset my cisco sg350-28p and its system has been blinking continuously after that. Its been over 20 mins. Also I dont think it has been properly reset and have not connected any ethernet cable yet. What should I do ??Should I wait for ...
Hi All, Good Day. I need some advice on the following issue. Problem:Cisco ATA is unable to register to CUCM and when checked on the switchport of the ATA, cdp information is also not available. HTTPS access to the ATA had also failed. We had to re...
I am planning on upgrading Unity Connection from 12.5(1) to 15.Specifically from 12.5.1.19017-4 to 15.0.1.11900-14 I am thinking an in-place upgrade.But first I need to increase the RAM.Disk and CPU are ok. Just wondering if any caveats I can expect?...
Hello,I am experiencing issues with Cisco Jabber Version 14.0.0.55563 Build 305563.Once you launch the app it crashes and gives you option to report the problem.Helps us resolve your problem popup is present. I tried clearing the credentials folder b...
I am trying to configure SSO on Expressway-C (version X15.0.2) using ADFS on Server 2019.I am following this guide.https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/expressway/config_guide/X15-0/mra/exwy_b_mra-deployment-guide-x150.pdf I am having ...
I am trying to configure Expressways to accept an inbound call from a remote party, and send to Call Manager.But on the Exp-E, the call is not matching my Search Rule as I thought it would.The Exp-E, it is matching the Default Zone, and rejecting the...
HelloI have two SIP trunks from the same SIP provider. and i am facing issue with incoming calls as they targeting the wrong SIP link .Noted in sip/sdp massage from my VGW to ISP contains the wrong SIP address (c=IN) ,dial-peer and sip bind configur...
Resolved! cisco MRP multiple ring
Dear,is possible on IE3100 connect two MPR ring together, as shown in the diagram. BR Bostjan
Hi all,Employees of our company use Cisco Jabber client for smartphones to connect to the corporate network telephony while they are at work remotely. The server certificate on our Cisco Expressway-E has expired.My server domain name is: ewaye.petror...
Resolved! CUCM Route Patterns
If I have 2 route patterns7631[0-9]and 7631XWhich one will takes priority? I'm guessing 7631[0-9] because it seems more specific. Can their be an equal match, and what happens is this scenario?
All, I have a number of Room kits that are setup in stand alone mode on a private and isolated network. Recently our network team has begun to switch our network to DHCP and not reserving IPs for the endpoints. This has created the problem that the a...
Hi, I work for a large financial organization in the Video department. We have a Zoom enterprise account and mainly use Zoom Rooms. Recently, Zoom has integrated direct dial in functionality for Webex meetings from Zoom Rooms. With that said, I'm ...
Join the ranks of some of the best, brightest, and most passionate technologists. The 2025 Cisco Champion application is now open. Apply by February 28, 2025. As a Cisco Champion, you will: Get early insights into new Cisco products and solut...
