Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I need to upgrade our CSM software from 3.1.2 to 3.1.3. How disruptive is the upgrade process other than the reload? Can I load the software during the day with no impact or should I plan for outage during the software load as well as the reload?Ho...
I currently am using 3 marking via IP Precedence for mission critical apps, best effort apps, and < best effort apps. The link is highly congested and I do lose EIGRP neighbor relationship relatively frequently due to congestion.I have received conf...
I need to TEMPORARILY install 2 6513s this weekend for a major cutover, the problem, however, is that the electrics are going to take a few more weeks. We will be using 2 2500W power supplies in each of the 2 6513s. These 6513s are replacing 2 exis...
Thanks. Can I do the tftp of the software during production use of the CSM without interruption? The reason I ask is that I would like to preload the software WITHOUT interruption today, then do the reload on Sunday during an outage window.Thoughts...
Russ,The neighbor loss is due to holding timer expirations, see output below.Jun 12 22:20:44: %DUAL-5-NBRCHANGE: IP-EIGRP 100: Neighbor 10.225.140.1 (Serial0/0.608) is down: holding time expiredJun 12 22:20:46: %DUAL-5-NBRCHANGE: IP-EIGRP 100: Neighb...
Thanks everyone! I managed to find a 6500 still in a box that had a 2500W power supply. It came with both the 2500W power cable and a normal, 110V, power cable. My concern was that the 2500W power cable has the horizontal prong on the opposite sid...
