Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Packet Tracer (packet-tracer) is available from the CLI. It will generate and insert a packet into the data path to test the generated packet traversing the device.Refer to http://www.cisco.com/en/US/docs/security/asa/asa82/command/reference/p.htm...
Hello,I too came across this problem once with PIX 7.2(2). It is a bug with 7.2(1)25 or greater in regards to the snmp config.Check Cisco bug CSCsg87808.When I encountered this issue, I downgraded to 7.2.1(24). You can either do the same, or remove t...
Hi,By default PIX/ASA's do proxyarps on its interfaces. Try disabling proxyarp's on your inside interface:sysopt noproxyarp insideRefer to this document for further information:http://www.cisco.com/en/US/products/ps6120/products_command_reference_cha...
Hi,Not exactly. A static would look like:static (inside,outside) tcp a.b.c.d 44444 w.x.y.z 443 netmask 255.255.255.255 0 0where a.b.c.d is the external IP (or use interface if that's the external IP to use), and w.x.y.z is the translated IP.Glen
