About CNMatt

CNMatt · 03-13-2023

I have a client that is installing Palo Alto firewalls.Currently, internal routing is all EIGRP so the plan is to setup OSPF on the 3 devices that will peer with the firewall and export routes from EIGRP to OSPF and vice versa. The firewall will onl...

CNMatt · 04-05-2023

All I really needed was for the default route to propagate into EIGRP and for the firewall to learn the internal routes.I would’ve liked to use P2MP but the PAN just didn’t like doing that with the Cisco switches & router. No big deal really.

CNMatt · 03-29-2023

It's funny you say this because I had this same conversation with the client last night. We don't need to advertise anything except a default route because access to the DMZ & Global Protect would just traverse the default route. I was actually inc...

CNMatt · 03-29-2023

Sorry for going dark on this. I appreciate everything everyone has done on this. Things just got stupid busy. I finally got to got this setup and here's what I found.P2MP: Tried this first with and without non-broadcast setting. For some reason t...

CNMatt · 03-15-2023

Not running OSPF on the L2 switch. It’s just there to show the L2 connectivity between all 3 routing devices.

CNMatt · 03-15-2023

Here's a quick diagram. It crude but hopefully it makes it easier to understand. Basically the non FW (Cisco switches) are already participating in EIGRP so all internal routes are learned that way. OSPF is only being used so the FW can learn inter...

Member Since	‎03-13-2023 06:45 PM
Date Last Visited	‎04-05-2023 10:46 AM
Posts	6
Total Helpful Votes Received	3

User Statistics

User Activity

Control OSPF Redistribution Or Neighbors

Re: Control OSPF Redistribution Or Neighbors

Re: Control OSPF Redistribution Or Neighbors

Re: Control OSPF Redistribution Or Neighbors

Re: Control OSPF Redistribution Or Neighbors

Re: Control OSPF Redistribution Or Neighbors