Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Could anyone tell me what the command would look like for a FWSM PIX to exclude an IP and/or Subnet from natting?For example:If I have all of my internal network traffic nated via the external interface IP, how could I tell the firewall, if I send pa...
I am unable to access the internet from our DMZ. From the inside I can access the internet and DMZ website. But from the DMZ, I can't access the internet by IP and I know I have to configure the DMZ to contact our DNS which is internal. Here is my...
I had the internet working internally. Now it doesn't work at all. I was playing around and trying to get the DMZ to go onto the internet. Now both won't go out. I am able to get to our website on the DMZ from the inside. which is good. I event...
My question is, when lookin over both configurations of the MSFC, I noticed something that didn't look right. Let me just say now that everything is working fine. But here is what I found and was wondering if RIP should be running or OSPF?6509A had...
Ok here is my question. 6509A firewall Mod: 3 Contexts:Admin Context2 Context36509B firewall Mod:Nothing configed...I have 2 6509s and each one of them have a Firewall Module. I have one of the firewall modules confgured. Now I want to replicate ...
So if I wanted the internal traffic to be NATTED to anything other than the 10.3 I can add the nat(inside) 1 0.0.0.0 0.0.0.0 and it will work, right? Also, if I wanted to add another segment to be excluded like the 10.3, can I still use the nat 0 co...
Well this is what I've found out so far. NO logs where showing up when I did the show log command for the DMZ1 interface. I wasn't able to ping the interface on the DMZ1 but I could on the inside and outside. I decided to run a ping consistantly w...
Here is the Show Route:PIX1/*******(config)# show routeS 0.0.0.0 0.0.0.0 [1/0] via Router_2600, outsideC 169.12.184.0 255.255.255.192 is directly connected, outsideC 169.12.184.64 255.255.255.192 is directly connected, insideC 169.12.184....
