ASA support IPsec / L2TP over PPPoE.
Here is a sample configuration for Site A (static IP) , Site B (Dynamic IP from PPPoE link) :
For Site A :
crypto ipsec transform-set myset esp-des esp-md5-hmac crypto dynamic-map cisco 1 set transform-set mys...
We have to use the command "logging debug-trace persistent" and then input the debugs we want to run, because if we had the debugs applied before that command, those debugs will not persist after ending the session.To confirm that you debugs will rem...
This is not supported as of now.
In order to have the DDNS and PTR records properly updated when a remote
client connects, we need to have the ASA send the FQDN of the remote client
to the DHCP server in charge of IP address assignment. Thus the ASA ...
Many thanks for the complete 1 stop all you need to know about OGS / Kudos !!
Also Very much appreciate the great , on point , extremely useful comments left by @Atri Basu
More details can be found in this rich article created by Atri :
https://ww...
https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect40/administration/guide/b_AnyConnect_Administrator_Guide_4-0/anyconnect-profile-editor.html You must include the ASA in the VPN profile’s server list in order for the clie...