Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
After upgrading my ios from c1700-ipbase-mz.124-1c.bin to c1700-k9o3sy7-mz.123-8t8.bin, when i start my router i get the following message:device does not contain a valid magic numberboot:cannot open "flash:"boot:cannot determine first file name on d...
After upgrading my ios from c1700-ipbase-mz.124-1c.bin to c1700-k9o3sy7-mz.123-8t8.bin, when i start my router i get the following message:device does not contain a valid magic numberboot:cannot open "flash:"boot:cannot determine first file name on d...
IN MY NETWORK WHICH WAS WORKING FOR A LONG TIME HAS SUDDENLY A PROBLEM WHICH IS THE FAST ETHERNET PORT GOES DOWN AND AFTER A WHILE IT GOES UP AND SO ON, I DECIDED TO CHANGE THE ROUTER, THE SAME THING HAPPEN IN MY NETWORK, COULD YOU HELP?
Hello,I did it, from my tftp server i ping the inside interface but i is still the same thing, it is still not working.I get the same message.Need your hepl again
That is what i get as an output on my tftp server:ERROR: np63.bin requested from (outside ip add),but client ip address (outside ip add) is outside security address range.On the pc connected to the PIX, i get this message:tftp failed (returned -10 ar...
