Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Some PC cannot work with the Virual Address of the Router (MSFC2) and must therefor take the standby or active address. Is there a solution or explanation for this Problem ?
I want to use the fwsm behind the MSFC2 in multi context mode.Can i define a unique IP-Adress for a shared outside Transfer vlan to the router on the fwsm, with a global command or something like this for all contexts ?Can someone send me an example ...
We have a new FWSM Module with Version 1.1(4).We want to upgrade this Version and have the Problem to get connection to the MSFC.The transfer-Vlan is configured and up on the Switch, the MSFC and declared as a firewall-vlan, with set vlan 700 firewal...
I wanted to use a VLAN with an IP-Adress at the MSFC2 as a transfer VLAN for the FWSM.The MSFC should route to the outside. The FWSM is in a Multi-Context, routing Mode and there should only be one Transfer-vlan.The Cat6500 has CatOs and the MSFC IOS...
