Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I was looking at the options of the adding a map to the topology. Today it looks like you only support the AlbersUSA map?Documentation seems also to state it requires D3 libs.Would there be an easy to get the global geo map from D3 as background i...
Hi Neil,
I'm not aware of any diagnostic command that could achieve this on a 3850 and the interface beacon is not available either.
In case I would come up with something I'll update this post.
Kind regards,
Xavier
Hi Neil,
Not all 3850 switches have this capabilities today. We started to introduce the blue beacon when we released the fiber models (S and XS).
You can find this note in the hardware installation guide
http://www.cisco.com/c/en/us/td/docs/switches...
Below is the syntax for the blue beacon on 3850
To turn a blue beacon on in cli
Switch(config)#
hw-module beacon on switch 1
To turn a blue beacon off in cli
Switch(config)#
hw-module beacon off switch 1
From the actual switch
Switch(config)#hw-mo...
