Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
This is how our setup is like:Laptops => Cisco 1100 AP(static IP) => Wired LAN (Subnet 1) => Cisco Router => Wired LAN (Subnet 2) => DHCP serverWhat i would like is that the DHCP-request from our laptops is forwarded/relayed through the AP and Router...
It's working right now.Thx for all the help, i'v learned a lot from all of you.The windows router had a problem with one of the interface, replacing it resolved the problem.Silly problem, difficult to trace.Grx and all the best, Joris
I'v run Ethereal on the Windows router and it shows the following:Broadcast from Cisco Router, Protocol ARP, Info: Who has 10.6.0.2? Tell 10.6.128.1.Reply on interface loop from the Cisco Router.On the other interface he gets an ARP reply from the DH...
We narrowed it down to the Windows 2003 acting as router.We temp. replaced this windows router with another cisco router and then it works.Wen we then place back the windows router it stops working.The windows router doesn't correctly routes the Cisc...
