Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
MPLS-TE is uni-directional, you need to create another tunnel in reverse path to have bi-directional operation
However, flex-lsp is among many other available technologies to address this requirement
https://www.cisco.com/c/en/us/td/docs/routers/...
this is a long walk, but we shall get there
I think SF-103 is your PE (PCC client) that is why you are getting
PCE process may not be running
"show PCE .." commands must be executed on PCE server console (192.168.1.150), also can you verify ipv4 ...
Imagine you need to send traffic from point-A to point-Z, IGP (routing protocol) provides reachability information and when a circuit breaks IGP need to re-converge, causing traffic to drop until new routing information is distributed to all nodes.
...
Hi Jose,
NCS540 is an IOS-XR based routing platform and it doesn't have the IOS/L2 configuration similar concept, you need l2transport services to achieve a similar outcome.
This is the URL for the configuration guides
https://www.cisco.com/c/en/...
