Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear Expert,I dont know why, I cannot open our Pix Web interface eventhough I have added my IP for the access.Below is the configuration list:pixsbcp# sh run: Saved:PIX Version 6.3(4)interface ethernet0 autointerface ethernet1 autointerface ethernet2...
Dear Expert,I'm currently trying to make our core switch 3550 to redirect all port 80 connetions to our Trend IWSS. I have added the below command:1. ip wccp web-cache 2. interface Vlan # ip wccp web-cache redirect inI have connect the Trend IWSS s...
Hi guys,How do I assign fix Ip to my web server ?Currently I have 5 available IP 60.49.208.220 - 60.49.208.224 .I want my web server(10.10.1.5) to use 60.49.208.221 and email server to use 60.49.208.222 (10.10.1.10) . The rest remaining IP will be on...
How do I enable ftp and nntp in the inside of my firewall.At this moment, all user in the inside cannot open ftp & nntp to go to outside.I have tried several method but all din't work. Is there any other commands that I forgot to put in ?I have added...
Hi, I wanted to open my PIX 525 so that I can Remote Desktop to any PC in my DMZ. Currently, I have only one available IP and using PAT to do this job. I thought I have done the right thing's but kept on falling. Anyone can tell me where did I when w...
Jorge,Last month my collegue change the pix password, after a few days he had forgotten his own admin password. So, he downloaded from CIsco the reset pix to factory setting files via ftp. Could this process have corrupted the PDM inside the firewall...
