About Minh Nguyen

Minh Nguyen · 11-24-2014

I am trying to connect a Cisco AP 3700i to a 3560 switch. The AP keep stuck in the operation down state. Found out the switch port on the 3560 only providing 13W which is not enough to fully power on the AP 3700. My question is why the the 3560 only ...

Minh Nguyen · 11-25-2014

I captured the bootup process from the AP!!IOS Bootloader - Starting system.flash is writableTide XL MB - 40MB of flashXmodem file system is available.flashfs[0]: 55 files, 9 directoriesflashfs[0]: 0 orphaned files, 0 orphaned directoriesflashfs[0]: ...

Minh Nguyen · 11-25-2014

I guess the command does not exist in 3560 switchHMLK-C3560-61024-S(config-if)#power inline static max 15400 ^% Invalid input detected at '^' marker.the marker is at "static" copy/paste put it off

Minh Nguyen · 11-24-2014

I will make plan to go to the remote site and pull the log off the AP.Thank you Jody for the helpful information.

Minh Nguyen · 11-24-2014

Jody, you are correct 13W only enough power to turn on the AP but not the radios. The AP is at a remote location and don't have the console plug in at this time. I thought the switch should supply the PoE device with 15.4W. I just wonder why in this ...

Minh Nguyen · 11-24-2014

Hi Jody,CDP is not disable on the switch, and the wireless AP 3700i is the only 1 PoE device connecting to the switch at the time. Below is the copy/paste from the switch. HMLK-C3560-61024-S01#sh power inlineAvailable:370.0(w) Used:13.0(w) Remainin...

Member Since	‎11-24-2014 09:09 AM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	6

User Statistics

User Activity

PoE question in WS-C3560-49PS-S

I captured the bootup process

I guess the command not exist

I will make plan to go to the

Jody, you are correct 13W

Hi Jody,CDP is not disable on