Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guys, I need a help regarding WGB. Before it was connected in WLC8540 (8.5.131.0) with root AP2802. Recently i swapped root AP to catalyst AP9120, also migrated to new WLC8540(8.10.183). But WGB failed to connect to SSID PSK based. Though PSK is ...
Hi, I've applied a workaround to stop roaming to outside Catalyst AP as there is Root AP2802 sitting next to WGB. Has put no mobile station in Radio interface as soon as it hooked up to AP2802(existing WLC) to stop roaming. Before it was joining to n...
Thanks for joining thread- Have you tried using the 2802 root AP with the new WLC- yes, didn't work.- What mode is the 9120 set to? Local- Is the 2702 software updated to the same version? this is just acting as client of wifi, do we need it?- If yo...
Yes, PSK is defined perfectly. Both WLC have same SSID, PSK. there are many users using that with same PSK. These are tested already, only this WGB has failed to connect new WLC with the above logs, though it connects to old WLC properly.
have compared, no difference, "802.1X Authentication Failed 3 times" is coming because of the below logs, exclusion policy is set 3 times for auth fail *Dot1x_NW_MsgTask_4: Sep 18 07:35:25.773: %DOT1X-3-PSK_CONFIG_ERR: 1x_ptsm.c:766 Client f4:4e:05:7...
while it is trying to connect new WLC, showing this logs, that client(WGB) may be using an incorrect PSK*Dot1x_NW_MsgTask_4: Sep 18 07:39:03.297: %DOT1X-3-PSK_CONFIG_ERR: 1x_ptsm.c:766 Client f4:4e:05:ab:bb:cc may be using an incorrect PSK*Dot1x_NW_M...
