About drewnivet

drewnivet · 04-27-2018

Hello, With regards to a wireless client sending multicast traffic to another wireless client within the same SSID/VLAN. Does multicast need to be enabled on the wired portion of the network as well (Controller management VLAN , AP VLANs, etc)? Mul...

drewnivet · 06-01-2017

Hello I've created a diagram here to illustrate the problem. Just looking for some confirmation that this would be the correct fix for this. Our server inside Site3 cannot reach the internal Site2 network is the issue. Appreciate any help. Diagra...

drewnivet · 05-31-2017

Just looking for some advice on this issue we are having. We have an active/standby 5520 setup on our network. Our network is being monitored by a remote server via a VPN connection. The monitoring server can reach everything in our network except...

drewnivet · 04-27-2018

I have answered my own question. Yes it does

drewnivet · 06-01-2017

Thanks Jon. Yes there is NAT exemption between the main campus inside networks and the remote site network Also, on Site2's firewall object network obj-10.10.10.0 subnet 10.10.10.0 255.255.255.0 nat (inside,any) source static obj-10.10.10.0 obj-10...

drewnivet · 06-01-2017

Thank you both. It looks like what Marvin has suggested is what is occurring. We will look into using the management interface for monitoring.

Member Since	‎04-11-2017 11:10 AM
Date Last Visited	‎04-11-2019 11:59 AM
Posts	6

User Statistics

User Activity

Multicast on Cisco WLC (8510)

ASA 8.2 NAT Exemption Question

Monitor standby ASA 5520 over VPN connection

Re: Multicast on Cisco WLC (8510)

Thanks Jon. Yes there is NAT

Thank you both. It looks