Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a catalyst 2950 which is bought recently. The prompt command does not seems to be there. Any idea. The software version is 12.1.(14) Thanks Agnelo
HelloWe have recently received 2 PIX 525 with FO . I have configured the PIX but when I try to access through Http, the get the login screen but I cannot go further as I cannot be authenticated. The software is 6.3(1).can anybody helpThanksAgnelo
HelloWe have recently installed PIX Firewall. Everything seems to be working fine (http, ftp, etc). There is one application which uses Pelco device (Video camera devices). The application uses the tcp port 9999 (to talk to the host) and the port fr...
HelloThere looks like that there is routing problem. You need to enable ipx routing on the local routers in the remote branches. Have RIP and EIGRP running on the routers. And disable rip advertisement on the specific ipx network. By default redistri...
Hi rallitks for the reply. But there is no NAT on the firewall configured and even the device (DX7000) has a valid IP address. There is also a FTP in DMZ and and using an access-list to let the traffic reach to the FTP serverI have also used a access...
Hi NadeemThere is a Pelco Video camera (DX7000) devices which allows the real-time view of all the cameras which are connected to this device. To view the real-time frames, the client use a S/W (again supplied by pelco) and connect to the DX7000(whic...
Hi1) Check for any bugs in the software which you r running on the router.2) Check the router does not have a memory leak. If u are not monitoring the router frequently, try to telnet the router when it hangs. If u do not get access to the router the...
