Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,about 60-70% of the SPA112s that I have deployed are not requesting firmware even after it picks up a new upgrade rule. The current firmware they are running is 1.2.0 (028). The firmware we are trying to upgrade to is 1.2.1 (004). I have checked t...
I've got an ATA which will register, but Port 2 is always showing the Hook State as Off. There is currently nothing connected to the device apart from a network connection and a power supply. This behaviour still occurs after a reboot, a firmware upg...
Hi,I've been trying to configure a Cisco 877 to give out DHCP option 66 and act as a tftp server so that I can provision the SPA112. I've managed to see that the tftp server has been accessed once by one of the devices, but it doesn't get much furthe...
That dialplan looks quite US centric. I would give this a go for a UK plan. It's not perfect, but it'll cover most bases.(*xx|*xx#x.|00xxxxxxx.|0[1-9]xxxxxxxxx|1xx|118xxx|99x|91x|*141#x.)
Do we have a rough eta on when the next official firmware release will be? 1.3.1 (003) appears to be much better than 1.2.1 (004), but would like an official release to roll out to the estate.
