Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to set up a pix501 and allow a Termianl Server session to connect to a server on the inside interface. At this point no luck, any help would be appreciated.Here are the commands that I have on my pix, related to this issue.In.IP.Add.X = ...
I have a PIX 515 which is used as a firewall and VPN hub.At present each of the remote sites connect, via a VPN tunnel, to this PIX via the single ISP connection.To provide a level of redundancy, at the ISP level, I wish to get a link from a second I...
Hi,I would have thought it depends on what you are trying to do.Using an access-list and then applying it to the outside interface with an access-group, you can, for example, allow access to an inside host using an external IP address that is differe...
More Information:Re did the sh xlate command while trying to connect using rdp to the server - saw this;1 in use, 6 most usedGlobal Out.IP.Add.116 Local ServerSo it looks like the PIX is doing something.
Hi jackko,Thanks for taking the time to answer my question.PIX version is 6.3The server is offering rdp service. The server has an Internal and External NIC at present. I can successfull conect (via rdp) to the external nic and when I establish a V...
Hi Jeff, Thanks for you input.This properly comes down to a basic router/firewall functionality issue, but just to get this clear in my mind.If I have the PIX with two interfaces, E1 goes to ISP1 and E2 goes to ISP2, the default gateway for the PIX i...
