Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are starting to implement SDA where I work and one of the engineers mentioned a "general VRF" to support different customers. Does anyone else have a config of a single vrf for multiple customers? Do they run separate VN's? It seems to me to defea...
Does the APIC need a direct connection to each leaf switch? From the documentation it seems that way but i also see that the APIC has a VIC card that needs to connect to the leaf to be able to detect the leaf switch. The VIC has only 4 ports which to...
I am trying to get an imaging server (Microsoft WDS) to be able to image clients on a different subnet than the server. A few questions maybe you guys could help me with. 1. From my readings the L2 switches that the clients are connected to must have...
I currently have a FTDv managed by FMC (v6.4). I have configured an inside interface through the FMC that is connecting to an access switch with an IP address but did not add a security zone. Problem is I cannot ping that interface from the switch or...
I am trying to have an external user (outside the perimeter of my network) that needs to access a server in the data center. Would I need to create 2 policies for this? One fw policy when it comes into the border firewall and another at the data cent...
Thank you Jalejand,If I have a single VRF and multiple address pools could I segment customer traffic using SGT rules?Customer A VRF1 with 10.10.10.0/24 and Customer B VRF1 with 10.20.20.0/24 and not allow Customer A to reach Customer B? Or just bett...
Thank you Flavio. One last question. If I can place multiple L3 VN's on the same VRF is security and same addressing not going to work? Example is Customer A does not want Customer B to be able to see their network traffic and both customer A and B u...
Sergiu,Thanks for the response. If I understand correctly, The APIC would connect to the leaf (using only 1 port in the pair eth-1 and eth-2). The leaf connects to the spine. When the APIC sees the leaf it gets registered. Once the leaf is registere...
