About deyanpanchev2

deyanpanchev2 · 03-29-2023

General Info: We would like to deploy two forms of checks for our Corporate Wi-Fi network. Ideally we want to authenticate and allow access only to corporate owned devices (windows laptop with machine certificates) with users from our AD, aka I want ...

deyanpanchev2 · 11-06-2017

Hello guys, I have a client with 2xASA5525x and they would not reload upon reload command (tried doing it via ssh, console and ASDM). Both ASAs are having the same issue and same output from the file check command (see below). Anybody experienced...

deyanpanchev2 · 05-02-2017

Hello guys, I am in a bit of a puzzle, more like Catch 22. I have a very simple ISE 2.1 deployment, two VM servers on same host, same subnet (no firewall in between), running as Primary A/M and Secondary A/M personas on the two nodes. After recent re...

deyanpanchev2 · 03-30-2023

Cheers mate, got it to work with machine auth being OK, but we want both user and machine auth to happen, the user based on username/pass and the machine to be authenticated via certificate and only then the access to be given. In the Windows Supplic...

deyanpanchev2 · 03-30-2023

Thank you, i will go in the TEAP direction. Is this currently the most usable article on the config side: https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/216510-eap-chaining-with-teap.html If not - can you share link or d...

Member Since	‎05-02-2017 05:25 AM
Date Last Visited	‎03-28-2023 09:04 AM
Posts	5

User Statistics

User Activity

ISE setup for Corp Wi-Fi with both user and machine auth

ASA 5525x would not reload - suspected issue with flash (Disk0:)

Secondary ISE does not sync to Primary - suspecting certificate issues, but cannot renew self-signed cert on secondary due to the sync issue

Re: ISE setup for Corp Wi-Fi with both user and machine auth

Re: ISE setup for Corp Wi-Fi with both user and machine auth