I have a following topology ASA --------Router ------------ Remote sites | | local networkMy ASA is one armed, the router advertised default route to ASA. I reserved a network for sour...
This is a packet for icmp through MPLS. It is captured on PE.The top label is assigned by the next hop router in the core, the second label is assigned by the remote PE.For the first label, I can verify it in LIB on the next hop router. Where can I ...
R-3735(config)#do show ip cef 6.6.6.6
6.6.6.6/32, version 25, epoch 0, cached adjacency 192.168.1.2
0 packets, 0 bytes
tag information set
local tag: 30
fast tag rewrite with Fa0/0, 192.168.1.2, tags imposed: {31}
via 192.168.1.2, FastEth...
thanks so much !!I used to do that, it advertised the prefix, but when traffic used it as destination for returned traffic, it did not work. I was not sure which was processed first, routing and nat.Now I configured static route pointing to lookback ...
I found I missed the following points:By default process id is used as the domain ID on IOS.Domain ID controls if OSPF routes are imported from MPLS super area as LSA 3 or LSA 5.RFC 4577 establishes that as long as OSPF routers are in the same domain...
