Hello all,I created a simple lab and encountered an issue. Could you tell me what I'm missing?I simply want that PC1 and PC2 can ping each other. To make it work, I configured the route, the access-list, and the access-group. Also, I enabled "inspect...
Hello guys,I'm having a weird issue on 3850. I keep getting kicked out after about 15 sec once I ssh into the device. The log shows 14 14:26:58.970: %SYS-6-TTY_EXPIRE_TIMER: (exec timer expired, tty 4 (my ip)), user usernameThe switch is running on 1...
@Jonatan Jonasson+ @Devaa, thank you guys so much! I could validate it after enabling the logging. I will definitely go over the link you guys provide and have a better understanding how different types of NAT work.%ASA-5-305013: Asymmetric NAT rules...
@MHM Cisco World, thank you for explaining.I did not know about "dynamic NAT is unidirectional not like static NAT which is bidirectional"Once I configured the following on the ASA2, PC1 can ping PC by using the real IP.object network obj-10.1.1.2_32...
@MHM Cisco World, first of all, i applied these to both ASAs.cap cap_inside interface inside match ip any anycap cap_outside interface outside match ip any anyASA1:asa1# show cap cap_inside5 packets captured1: 21:58:19.384745 10.1.1.2 > 172.16.1.2 ic...
@MHM Cisco World, that's what i wanted to hear. GW for PC1 and PC2 has been configured correctly. It could be gns3 issue. thank you so much for validating.
