About jss.cisco

jss.cisco · 11-20-2013

Hi Everyone,Having a strange problem. We recently migrated from FWSM to ASA-5585X running 9.1(2). Since we did that, we are having problems from an APP server in DMZ-A talking to a DB server in DMZ-B. The error we are getting in Oracle is ORA-1259...

jss.cisco · 12-20-2013

Karsten is correct. As long as your 4 different subnets are ingressing on the same interface, then create your object group using the IP's that you need.As Colin mentioned, you can use 'same-security-traffic permit inter-interface', but in my opinio...

jss.cisco · 11-21-2013

Very good article - thanks. I will add these options to my service policy and see what happens.

jss.cisco · 11-21-2013

Thanks - this is good info. I will create the service policy and see what happens.

jss.cisco · 03-01-2013

Your original post said F0/24, but regardless, yes both sides needs to be setup as trunk.hostname S00.PS!interface FastEthernet0/24des Trunk to Switchswitchport mode trunkswitchport trunk encapsulation dot1qswitchport trunk native vlan 20switchport m...

jss.cisco · 03-01-2013

show interface trunkIf it is working you would see this:Switch# show interface trunkPort Mode Encapsulation Status Native vlanFa0/48 on 802.1q trunking 20

Member Since	‎03-01-2013 11:40 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	8

User Statistics

User Activity

ASA 9.1 Problems with Oracle Database

how to create a ACL to allow multiple IP addresses to access to

ASA 9.1 Problems with Oracle Database

ASA 9.1 Problems with Oracle Database

connecting 2 switches together

connecting 2 switches together