Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Everyone,Having a strange problem. We recently migrated from FWSM to ASA-5585X running 9.1(2). Since we did that, we are having problems from an APP server in DMZ-A talking to a DB server in DMZ-B. The error we are getting in Oracle is ORA-1259...
Karsten is correct. As long as your 4 different subnets are ingressing on the same interface, then create your object group using the IP's that you need.As Colin mentioned, you can use 'same-security-traffic permit inter-interface', but in my opinio...
Your original post said F0/24, but regardless, yes both sides needs to be setup as trunk.hostname S00.PS!interface FastEthernet0/24des Trunk to Switchswitchport mode trunkswitchport trunk encapsulation dot1qswitchport trunk native vlan 20switchport m...
show interface trunkIf it is working you would see this:Switch# show interface trunkPort Mode Encapsulation Status Native vlanFa0/48 on 802.1q trunking 20
