Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
IDS and VMS are working fine, the issue is when my Windows box running VMS goes offline(crash, reboot....). I bring the VMS box back online and poll the IDS, but it reports no events.I tested it by running Nessus while the VMS box is offline, from th...
When I make configuration changes, save to database. I goto Deployment, submit, select the IDS, then click Deploy. I pick the correct configuration from the list, select Next. The Finish (to execute immediate). It take a very long time before I see t...
Trying to FTP from inside to outside. It works with nat 0 but when I use a static mapping from a.b.c.148(inside address) to a.b.c.120(outside address) it will not work. They are in different subnets. The PIX seems to just ignore the packet. There is ...
I have a switch between two routers. On the outside of both routers is connections to two different networks. Also the default routes on the routers point to the outside of router A. Host connected to the switch need to talk to both networks. The pro...
I need to advertise route from the inside of the pix to the outside of the pix. I am using EIGRP inside and outside(but can use any routing protocol). Is this possible? If so what is the best way to do it?Thanks,Jamey
I did a "sh event alert past 23:00" and it does show the old alerts, however security monitor still does not show then. It only show alerts that happen while it is connected.I cleared the alerts on the IDS. ran Nessus, then did "sh event alert past 2...
I have tried that with no luck. I have set it to the earliest date and still nothing.Is there a way to see if the IDS is storing the events? From the CLI I try sh events and I get nothing. But if a do a sh events and start Nessus it show the current ...
