Hi , I would like to know if anyone had used asr-group freature in active/standby mode. Is it not recommended by cisco for active/standby mode ? The feature works in both environment. Thanks in advanceTomy
Hi , I am facing flash space issue with my FWSm and want to delete the asdm image from flash to free up the space. But my vendor says its not possible to delete the asdm image from fwsm. Please if anyone have come cross this ? Let me know if any meth...
Hi , I am facing a problem with my fwsm running in active/standby. I am getting flash space insufficient error when I issue wr mem on both primary and secondary fwsm.# wr memoryBuilding configuration...Cryptochecksum: 7be849ee 23ef13fc 01cdd329 2a0bd...
Hi ,My FWSM flash has got corrupted and I need to format the same. After the format I have to upload the new image and boot the box and restore the configs. Please help me if you have any document for the procedure.RegardsTomy
You are right, my requirement is to free up the space only , I have to avoid a format of flash and reload at any cost.We are not using object-groups for any rules, will the use of object-group help to reduce the running-config size considerably ?Reg...
Yes , this is the ecact message..I have pasted below for ref.fwsm-01# wr memBuilding configuration...Cryptochecksum: 051f3c8e 90092c99 e1b76866 0b27998eBuffering file....Insufficient flash space available for this request: Size info: request:303676...
Is it a hardware/software limitation with FWSM or a bug ? Do you think that my problem would be due to corrupted flash by any chance ? Vendor is asking me to format the flash and its quite difficult for me to get a downtime for a reload after format...
Hi Kureli ,Many thanks for your reply . My flash is almost full. Startup config is nearly 1.7 MB + 12 MB asdm + 6 MB image. Current running-config is 3+ MB. If I copy the running-config to text file, its size is 3+ mb. Have nearly 37000 ACEs. Fir...
