About daniel.mckinney

daniel.mckinney · 05-17-2017

Hello I am trying to understand if there are alternatives for QOS on INGRESS on the Dialer1 interface as we cannot queue but we can police.I have read through Bufferbloat.net and various blogs/documents/articles - everything points towards ingress be...

daniel.mckinney · 05-18-2017

Hi Joseph Thanks for the suggestions. I guess at this stage due to the complexities involved with this type of scenario. I am inclined to go with a dedicated circuit for each. It seems there are a lot of areas to configure for QOS and without a sta...

daniel.mckinney · 05-18-2017

Hi Joseph Unfortunately it is not possible to manage egress on the far side. I have noted your point about WRED, thanks I suspect that the big problem will be that I cannot queue the traffic on the WAN interface so if UDP traffic is compromised by T...

daniel.mckinney · 05-17-2017

Hi Joseph Yes I sort of thought that might be the case for ingress traffic... I have LLQ set on the Dialer1 interface: -EGRESS- class-map match-all VOICEmatch ip dscp ef class-map match-any SIGNALINGmatch ip dscp cs3 match ip dscp af31 policy-map C...

daniel.mckinney · 05-17-2017

Hello Joseph Thanks for the response. I configured the policy maps to police against the SVI's and I can see what you mean about the "mileage may vary" point. I get varied speeds in around the specified 5 upload 20 download e.g. 4.5/19, 4.1/19.2 e...

daniel.mckinney · 05-17-2017

Hello Georg Sorry for not getting back sooner. I combined both policies and applied them outbound. That seems to work for me. Thank you for your help Kind Regards

Member Since	‎05-15-2017 01:37 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	7

User Statistics

User Activity

887VA Bandwidth per VLAN

Hi Joseph

Hi Joseph

Hi Joseph

Hello Joseph

Hello Georg