Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
My new DSL provider requires PPPoe to work. When I enabled PPPoe on my 506 unit, it turned off PPTP. How do I get both of these to work? I am running 6.3.3ThanksJeff
I continually find my dsl down at home. This is the log I get from the pix:<163>Jan 16 2005 06:31:48: %PIX-3-403503:PPPoE:PPP link down:<163>Jan 16 2005 06:31:48: %PIX-3-403503:PPPoE:PPP link down:Peer not responding<163>Jan 16 2005 06:31:48: %PIX-3-...
Hello,I am running 6.3.3 with PPTP used heavily. I want to make sure any sessions that remain inactive for more than say 30 minutes are terminated. By inactive I mena no traffic either direction, even if the keep alives are good.I currently have the ...
Hello,506 unit running 6.3.3. I noticed since installing 6.3.3, that everytime I reboot my SysLog server, the PIX starts throwing these errors, and refuses any outbound traffic:201008: The PIX is disallowing new connections.305006: portmap translatio...
Hello,I want to implement an IDS solution without having to add another piece of hardware that would sniff all traffic, since the PIX already does that (everything must go through the pix to enter or leave our network). Is there a cisco (or 3rd party...
I believe what you are refering to is a bottleneck. Yes, even at only 2% utilization, the 100meg interface will overload the leased line interface. The 2 meg pipe might be sufficient depending on the number of users behind the PIX, and applications y...
Thanks for the reply. I do not have either of those commands in my config (store-local / auto-update). Can you explain a little about what each does? Also what else I would need to do to implement the auto-update service (looks like you need a server...
